APS Product 1

Model Number Description

0025-2-1-JA-*

/ l l l \

HP R V S C

HP = Nominal Horsepower of Compressor (for capacity under specific operating conditions consult the product sheet for the particular model) R = Refrigerant* 1 Freon 22 2 134-a 3 134-a, 404-a, 507 *The compressors designed for HFC 134-a and other HFCs can be used in systems with R-12. V = Voltage/Electrical Configuration 1 120/60/1 2 220-240/50/1 3 208-230/60/1 and 200-220/50/1 4 120/60/1 and 100/50/1 5 200-230/60/3 and 200-240/50/3 7 460/60/3 and 380-420/50/3 8 575/60/3 and 500/50/3 9 208-230/60/3 and 200-220/50/3 S = Shell Model of the Compressor C = Classification Insert at * on chart the required letter and number classification below (ie. C1 for Ckass I Groups C and D, Division 1). 1 = Divisions 1 and 2, Zones 1 and 2 2 = Division 2, Zone 2 A Class I Groups ABCD B Class I Groups BCD C Class I Groups CD D Class I Group D E Class II Groups EFG F Class II Groups FG G Class II Group G H Class III Compressors are normally packaged with a UL-recognized conduit seal, fiberglass packing, and plaster so that the unit can be properly isolated from the rest of the electrical system of the host equipment, although they are not always required in all systems.

APS MODEL NUMBER														AMPERAGE			START		RUN		RELAY	MOTOR
										COOLING		ENERGY		RATINGS			CAPACITOR		CAPACITOR		PART	PROTECTOR
HP		R		V		S		C	CONDITIONS	BTUH	Watts	Amps	EER	RLA	LRA	MCC	MFD	Volts	MFD	Volts	Number	Number

0025	-	2	-	1	-	JA	-	*	45º/130/65/130/95	2620	766	5.0	6.1	4.8	25.5	6.7	C233-280	110	N/A		C0090-00*	C0369-11
0025	-	2	-	2	-	JB	-	*	45º/130/65/130/95	2170	635	2.3	5.1	3.4	18.0	3.9	C233-280	110	N/A		C0090-09	C0369-34
0033	-	2	-	1	-	JC	-	*	45º/130/65/130/95	3550	1038	6.8	6.1	7.1	42.0	9.9	C233-280	110	N/A		C0090-06*	C0369-32
0033	-	2	-	3	-	JD	-	*	45º/130/65/130/95	3550	1038	3.4	6.1	3.3	19.6	4.6	C41-53	250	N/A		C0090-05*	C0369-35
0050	-	2	-	1	-	JE	-	*	45º/130/65/130/95	5300	1550	9.3	6.2	10.4	48.0	14.5	C233-280	125	N/A		C0090-04*	C0369-21
0050	-	2	-	3	-	JF	-	*	45º/130/65/130/95	5300	1550	4.7	6.2	5.0	27.0	7.0	C43-52	250	N/A		C0090-00*	C0369-30
0075	-	2	-	1	-	RA	-	*	45º/130/65/130/95	8070	2360	15.0	6.6	13.3	66.3	18.6	C189-227^	220	N/A		C0001-41	C0127-18
0075	-	2	-	3	-	RB	-	*	45º/130/65/130/95	8070	2360	7.5	6.6	7.6	33.5	11.0	C64-77^	250	N/A		C0001-38	C0329-07
0100	-	1	-	1	-	RC	-	*	45º/130/65/130/95	10800	3159	12.6	7.8	13.2	60.0	18.5	C124-149	220	C25	370	C0001-35	C0127-40
0100	-	1	-	3	-	RD	-	*	45º/130/65/130/95	10800	3159	6.3	7.8	6.0	33.0	8.4	C64-77	250	C15	370	C0001-19	C0329-00
0100	-	2	-	3	-	RE	-	*	45º/130/65/130/95	10000	2925	6.5	7.3	7.3	40.0	10.2	C108-130^	220	C15	370	C0001-19	C0127-05
0125	-	1	-	3	-	RF	-	*	45º/130/65/130/95	12500	3656	6.0	8.7	7.0	34.0	9.8	C108-130	220	C25	370	C0001-38	INTERNAL ONLY

[ Home ] [ Information ] [ Up ] [ .25 Hp - 1.25 Hp ] [ 1.5 Hp - 5 Hp ] [ Over 5 hp ] [ Table ] [ Printable Form ][ .33 Hp ] [ .5 Hp ]

Information Request Form

Andover Protection Systems Inc.
63 Flushing Avenue, Bldg 5, Brooklyn, NY 11205 USA
Phone: 718-643-1110 FAX: 718-797-1120 E-mail: Click to E-mail

Click to E-mail with questions or comments about this web site.
Copyright© 1998-2006 Figment Design
Last modified: June 09, 2006